Service 14 · Undercoat & painting works
A clean finish coat, inside and out
Surface preparation, undercoats and finish painting, inside and out.
Painting is the finish everyone sees. Most of the work is preparation: letting new plaster dry out, filling and sanding, sealing with an undercoat or alkali-resistant primer, and masking cleanly. That is what makes the final coat look crisp and stay that way through sun, humidity, harmattan dust and driving rain. Inside we use washable emulsions and satin finishes; outside, weather-shield and textured coatings with anti-fungal protection.


What’s included
- Filling, sanding and cleaning of surfaces
- Undercoats and alkali-resistant primers
- Interior walls and ceilings in emulsion or satin
- Exterior facades in weather-shield or textured coatings
- Wood and metal finishes for doors, gates and railings
Where it’s used
- Full interior and exterior repaints
- New-build painting
- Office and school refurbishments
- Gates, railings and timber
Every scope is priced line by line, so you only pay for what your building needs.
Materials & finishes
What goes into it
Undercoats
Primers and undercoats matched to plaster, wood or metal.
Interior
Washable emulsions in matt and silk, and satin for high-traffic rooms.
Exterior
Weather-shield and textured coatings with anti-fungal additives.
Wood & metal
Stains, varnishes, metal primers and gloss enamel.
How we work
A clear, five-step process
You always know what happens next and what it costs.
- 01
Survey
Assess surfaces, moisture and any repairs needed.
- 02
Prepare
Fill, sand, clean and prime; protect floors and fittings.
- 03
Apply
Two or more finish coats by brush, roller or spray.
- 04
Inspect
Check in daylight and artificial light; touch up.
- 05
Record
Hand over the colour schedule and care guidance.
Planning a roof, an interior or a full fit-out?
Send us your drawings or a few photos of the site. We will arrange a free site visit at a time that suits you, measure up and send an itemised quote.
